Installing a differential cover

Clean, seal, bolt on, torque to 45 ft-lbs, fill with oil.

1. Drain the old oil and remove the old cover.
2. Clean the sealing surface on the housing until it's bare and dry.
3. Put a gasket (or sealant) on the flange of the housing.
4. Bolt on the new cover and torque the bolts to 45 ft-lbs.
5. Fill with the correct gear oil until it reaches the bottom of the fill hole.
6. Full PDF instructions for each cover are in our Installation Instructions articles.

Still have questions? Call (520) 888-4441 or email support@ballisticfabrication.com with your order number, vehicle year/make/model, the part number, and a photo.